Start here

Security+ and DoD 8140: what government and contractor jobs require

How Security+ fits DoD 8140, which replaced 8570: the old IAT II baseline, DCWF work roles, deadlines for contractors and service members, and how to prepare.

By the CertPine editorial team7 min read

If you work in, or want to work in, cybersecurity for the US Department of Defense, Security+ is often the certification the job asks for. This page explains the rules behind that: the old DoD 8570 framework, the DoD 8140 program that replaced it, where Security+ sits in each, and what it means if you are a service member, a DoD civilian or a contractor.

From DoD 8570 to DoD 8140

DoD 8570.01-M, the Information Assurance Workforce Improvement Program, sorted cyber jobs into categories and levels. Technical jobs were IAT (Information Assurance Technical) Levels I to III, management jobs were IAM (Information Assurance Management) Levels I to III, and there were a few specialist categories. Each category and level had a list of approved baseline certifications. Hold one of those, and you met the requirement.

DoD Manual 8140.03, the Cyberspace Workforce Qualification and Management Program, replaced it. It was published on February 15, 2023. Instead of broad categories, it qualifies people against work roles from the DoD Cyber Workforce Framework (DCWF), such as System Administrator or Cyber Defense Analyst, each at a Basic, Intermediate or Advanced proficiency level.

DoD 8570 and DoD 8140 compared
DoD 8570.01-M (old)DoDM 8140.03 (current)
How jobs are groupedCategories and levels, such as IAT II or IAM IDCWF work roles, each at Basic, Intermediate or Advanced proficiency
How you qualifyHold an approved baseline certification for your category and levelFoundational qualification (an approved certification, training or education option) plus residential qualification (on-the-job and environment-specific requirements)
Staying qualifiedKeep the certification currentContinuous professional development: more than 20 hours a year, or the certification’s own renewal requirement
Where Security+ sitsBaseline for IAT Level II and IAM Level IA foundational qualification option for a range of work roles

Timeline

  • August 11, 2015: DoD Directive 8140.01 is signed, setting up the DCWF as the reference for cyber positions. It was reissued on August 5, 2020.
  • February 15, 2023: DoDM 8140.03 is published and takes effect, replacing the 8570 manual.
  • February 15, 2025: two years on, military and civilian personnel in cybersecurity work roles were due to be qualified.
  • September 19, 2025: version 2.1 of the DoD 8140 foundational qualification matrix takes effect.
  • February 15, 2026: three years on, the deadline for the IT, cyber effects, intelligence (cyber) and cyber enabler work roles.

Since those dates, every incumbent and new hire is expected to qualify under 8140, according to the DoD 8140 FAQ. You may also see the DoD CIO's 8140 site refer to the Department of War (DoW); the program is the same.

Where Security+ fits

Under 8570, Security+ was the baseline certification for IAT Level II and IAM Level I. That made it the default requirement for a large share of DoD security jobs, from system administrators to junior security managers.

When 8140 arrived, the DoD says all of the 8570 certifications carried over and were mapped to the matching DCWF work roles and proficiency levels. Security+ is in the DoD 8140 qualification matrix, and CompTIA lists it against about 20 work roles. Examples include Technical Support Specialist, System Administrator, Cyber Defense Analyst, Security Control Assessor and Information Systems Security Manager.

Two details matter when you read the matrix:

  • Proficiency level counts. A certification is mapped to a work role at a level. Options approved for a higher level also count for the lower levels, but not the other way round. Security+ may cover a role at one level and not at the next.
  • A certificate alone is not full qualification. Under 8140, the certification is only the foundational part. You also need the residential qualification your organisation sets, such as on-the-job sign-off for its systems.

Many job postings and contract documents still say "8570 IAT Level II" or "DoD 8570 compliant". In practice that usually means Security+ or another certification from the old IAT II list. If a posting names a work role code instead, look that role up in the current matrix.

What it means for your job

Service members and DoD civilians

If your position is coded to a DCWF work role, DoDM 8140.03 gives you nine months from assignment to meet the foundational qualification and twelve months for the residential qualification. The two clocks run at the same time. Your component can grant a waiver only under severe operational or personnel constraints, for up to six months, and consecutive waivers are generally not allowed. Your component can also require certifications or training beyond the DoD baseline.

Contractors

DoD 8140 covers contractor employees doing cyber work, but the deadline and the exact certification come from your contract. The standard DFARS clause, 252.239-7001, still refers to DoD 8570.01-M, so some contracts use 8570 language and others use 8140 work roles. Contractors commonly need Security+ before starting or within a short window after hire. The DoD FAQ also says components should not pay for contractors to obtain or keep required certifications, so expect to cover it yourself or through your employer. Check your contract or ask your ISSM which rule applies.

Keeping it active

A lapsed certification stops counting. The DoD has not recognised CompTIA's old lifetime certifications since 2011, and the 8140 matrix expects continuous professional development of more than 20 hours a year or the certification's own renewal requirement. Security+ lasts 3 years; you renew it through CompTIA's continuing education program, for example with 50 CEUs or a higher CompTIA certification. Our Security+ renewal guide covers the options and fees.

SY0-701 or SY0-801 for DoD

The exam code does not matter to DoD. SY0-701 and SY0-801 both lead to the same CompTIA Security+ certification, and the 8140 matrix names the certification, not an exam version. SY0-801 launched around November 17, 2026, and SY0-701 remains available in English until June 11, 2027.

Choose by date and study materials, not by employer. If your deadline is close and you have been studying for SY0-701, take it. If your exam will land after the SY0-701 retirement date, prepare for SY0-801 from the start. SY0-701 or SY0-801 compares the two and helps you pick.

How to prepare

A hire-then-certify deadline puts a clock on your study, so plan backwards from it. Allow time to book an exam slot and a buffer in case you need a retake.

  1. Confirm the requirement. Ask for your work role code and proficiency level, or the contract wording, and check that Security+ meets it.
  2. Work through the objectives. Use the SY0-701 exam objectives as your checklist, weighting your time by domain. Security Operations alone is the largest share of the exam.
  3. Build a schedule. The study plan generator turns your deadline into a week-by-week plan.
  4. Practise under exam conditions. The exam is up to 90 questions in 90 minutes, and you need 750 on a 100–900 scale. Start with the free practice test to see where you stand, then take timed, full-length exams before you book.
  5. Report it. Once you pass, tell your supervisor, ISSM or contract manager straight away so your qualification is recorded before the deadline.

Questions people ask

Is Security+ still DoD approved under 8140?
Yes. Security+ is a foundational qualification option in the DoD 8140 qualification matrix, and CompTIA lists it against about 20 DCWF work roles. Whether it covers your job depends on the work role and proficiency level your position is coded to, so check the current matrix or ask your supervisor or ISSM.
Is Security+ IAT Level II?
It was. Under the old DoD 8570.01-M, Security+ was an approved baseline certification for IAT Level II and IAM Level I. Those categories were replaced by DCWF work roles under DoDM 8140.03, but many job postings and contracts still use the IAT II wording, and in practice it usually means Security+ or a certification at that level.
Has DoD 8140 replaced DoD 8570?
For DoD military and civilian personnel, yes. DoD Manual 8140.03 was published on February 15, 2023 and replaced the 8570 manual. Contracts are slower to change: the standard DFARS clause still cites DoD 8570.01-M, so contractors should follow what their contract says.
How long do I have to get Security+ for a DoD job?
Under DoDM 8140.03, military and civilian personnel have nine months from assignment to a cyber work role to meet the foundational qualification (such as a certification) and twelve months for the residential qualification. Contractor deadlines are set by the contract and are often shorter, sometimes before your start date.
Does it matter for DoD if I take SY0-701 or SY0-801?
No. Both exams lead to the same CompTIA Security+ certification, and DoD 8140 qualification lists name the certification, not the exam code. Pick the version that fits your exam date.
Do I need to keep Security+ current for a DoD role?
Yes. The DoD stopped recognizing lifetime CompTIA certifications in 2011, and 8140 expects continuous professional development. Security+ lasts 3 years, and you keep it active before it expires by earning 50 continuing education units or another route in CompTIA's CE program, such as earning a higher CompTIA certification.

Test yourself

See where you stand with 25 free questions.

Original SY0-701 questions across all five domains, performance-based ones included. Every option is explained. No account needed.

Exam details change. We check this page against CompTIA's published information and date every update; confirm prices and dates on comptia.org before you book.